Windbreak Installation For Batten Siding

For cladding rooms, a windbreak cladding strip is often used. This element complies with and is made from environmentally friendly materials. It provides high strength indicators, does not deform waterproof and non burning stuff that can withstand severe stress.

The properties of the element are best combined with other ingredients and other building equipments. Without fasteners, finishing the house with siding will not work, since many fasteners offer a decorative way that cannot be dispensed with.

Windbreak For Siding – How To Do It Yourself?

The siding for windbreak is of high quality. Wind cladding board is intended for roofs, this small information does not provide for components, in addition, from the name it is already clear that the material is made of wood. To create it yourself, you should strictly adhere to the scheme. So let’s start:


Since there is a box on top of the rafters, the edges of the gable are first aligned with it. This should be done before starting the installation. To find out how long roofing will last, measure the edges on one side of the home to the other. A line is drawn with a string, along which all the protruding ends of the slats are cut. The rest of the lathe is padded  – these are boards, the width of which is 2 to 3 cm. The cornice slats hold the lathe together, which allows us to additionally attach the windbreak. To do this, the cornice slats are nailed perpendicular to the protruding ends of the casing.

Next, the siding board is attached, nailed to the roof curtain and hung over the crate. If there is slate, the board is fitted under the shaft until it rests and only then is it nailed. They are nailed to the eaves and battens in a check pattern. As a result, you should get two rows of fasteners. Such a model is more reliable and even more interesting thanks to the ornate carving on the lower edge of the board.

Leave a Reply