How To Adjust Cabinet Hinges

Adjusting cabinet hinges is an essential task that should be performed periodically. Hinges are subjected to wear and tear over time, which can result in doors not closing properly or creating gaps that allow dust and debris to accumulate on the cabinet’s contents.  Therefore, vital to know how to adjust your cabinet hinges to maintain proper functionality. Here is a step-by-step guide on how to adjust cabinet hinges.

Adjust Cabinet Hinges

  1. Determine the Type of Cabinet Hinges

Before making any adjustments, you must determine the type of hinge fitted on your cabinet doors. There are three main types, including concealed, pie-cut, and surface-mounted hinges. Each hinge type, therefore, requires a specific adjustment process.

  1. Inspect the Hinge Screws

Check the screws that are holding the cabinet hinge in place to ensure they are well-secured. Loose screws can cause the hinge to wobble, affecting the door’s alignment. Tighten any loose screws using a screwdriver.

How To Adjust Cabinet Hinges

How To Adjust Cabinet Hinges

  1. Adjust Height

If your door is sitting too high, it may be due to a hinge that has been adjusted to open the door wider than it should. Adjust the height of the hinge to bring the door down to its proper position, ensuring that it aligns with the other cabinet doors. You can accomplish this by loosening the screws that hold the hinge in place and adjusting the height until the door is level.

  1. Adjust Depth

If your door is too close or too far, you’ll need to adjust the hinge depth. Loosen the screws and move the hinge forward or backward to adjust the door’s position. Tighten the screws to lock the hinge into the correct depth position.

  1. Adjust the Side-to-Side Position

If your cabinet door is rubbing against its frame, it may be necessary to adjust the side-to-side alignment. To do this, loosen the screws on the hinge that connect the hinge arm to its frame. Move the hinge arm to the left or right to adjust the door’s position. Tighten the screws to lock the hinge into place.

  1. Ensure Proper Closure

Ensure that the door properly closes once it is in alignment. Tighten any screws that may have become loose during the adjustment process. Test the door’s closure by opening and shutting the door a couple of times.

In conclusion, adjusting cabinet hinges is crucial to maintain proper functionality and longevity of the cabinet doors. Always remember to assess the type of hinge on your cabinet doors first, then follow the above steps to make necessary adjustments. Finally, ensure proper closure and safety after any adjustment made to your cabinet hinges. With proper care and maintenance, your cabinet hinges can last for years to come.

Leave a Reply